www.trikdis.com
8
February, 2020
“Ethernet” communicator
E16
3.
Using a USB Mini-B cable connect the
E16
to the computer.
4.
Run
TrikdisConfig
. The software will automatically recognize the connected communicator and will open a window for
configuration.
5.
Click
Read [F4]
to read the communicator’s settings. If requested, enter the Administrator or Installer 6-digit code in the
pop-up window.
Below we describe what settings need to be set for the communicator to begin sending events to the CMS (central monitoring
station) and to allow the security system to be controlled with the
Protegus
app.
2.1
Settings for connection with Protegus app
In “System settings” window:
1)
Select
Security panel model
that will be connected to the communicator.
2)
Select
Remote Arm/Disarm
if you want users to be able to control the panel in
Protegus
app with their keypad code.
This setting is only shown for directly controlled panels.
3)
For the direct control of Paradox and Texecom panels enter
PC download password
. It must match the password that is
entered in the control panel.
Note:
For the direct panel control to work, you will need to change the panel settings. How to do this is described in
chapter
4 “Programming the control panel”
. In this section you will find information on how to change the PC
download/UDL password.
In “User reporting” window, “PROTEGUS Cloud” tab:
4)
Tick the checkbox
Enable connection
to the
Protegus
Cloud.
