www.trikdis.com
10
February, 2020
“Ethernet” communicator
E16
8)
TCP or UDP
- choose event transmission protocol (
TCP
or
UDP
) in which events should be sent.
Note:
If you selected the
DC-09
protocol, additionally enter object, line and receiver numbers in the
Settings
tab of
the
CMS reporting
window.
9)
(Recommended) Configure
Primary channel Backup
settings.
10)
(Recommended) Configure
Parallel Channel
and its
Parallel Channel
Backup
settings.
After finishing configuration, click
Write [F5]
and disconnect the USB cable.
Note:
For more information about other
E16
settings in
TrikdisConfig
,
see chapter
6 “TrikdisConfig window
description”
.
3
Installation and wiring
3.1
Schematics for wiring the communicator to a security control panel
Following one of the schematics provided below, connect communicator to the control panel.
