www.trikdis.com
7
February, 2020
“Ethernet” communicator
E16
Indicator
Light status
Description
Yellow solid
(Configuration mode)
No connection with computer
TROUBLE
OFF
No operation problems
1 red blink
Connection error at the "physical" level (PHY Link status error)
2 red blinks
DHCP error
3 red blinks
DNS error
6 red blinks
No connection with the receiver
7 red blinks
Lost connection with control panel
Red blinking
(Configuration mode)
Memory fault
Red solid
(Configuration mode)
Firmware is corrupted
1.6
Structural schematic with
E16
usage
Note:
Before you begin, make sure that you have the necessary:
1.
USB cable (Mini-B type) for configuration.
2.
At least 4-wire cable for connecting communicator to control panel.
3.
CRP2 cable for connecting to Paradox panel`s serial port.
4.
Flat-head 2,5 mm screwdriver.
5.
Particular security control panel`s installation manual.
Order the necessary components separately from your local distributor.
2
Quick configuration with
TrikdisConfig
software
1.
Download
TrikdisConfig
configuration software from www.trikdis.com (type “TrikdisConfig”
in the search field) and
install it.
2.
Open the casing of the
E16
with a flat-head screwdriver as shown below:
