Trikdis Ethernet E16, Installation Manual

Page: 4 / 34

www.trikdis.com 4 February, 2020
“Ethernet” communicator E16
1 Description
“Ethernet” communicator E16 directly connects to supported DSC, Paradox, UTC Interlogix (CADDX), Innerrange, Texecom,
Honeywell, Crow and Pyronix alarm panels.
Communicator transmits full event information to the Central Monitoring Station.
Communicator also works with
Protegus application. With Protegus users can control their alarm system remotely and get
notifications about security system events. Protegus app is compatible with all security alarm panels from various manufacturers
that are supported by the E16 communicator. Communicator can transmit event notifications to the Central Monitoring Station
and work with Protegus simultaneously.
For panels from other manufacturers use the E16T communicator.
Features
Sends events to monitoring station receiver:

Sends events to TRIKDIS software or hardware receivers that work with
any monitoring software.

Can send event messages to SIA DC-09 receivers.

Can send event messages to SUR-GARD receivers. The annex has a
table for converting Contact ID codes to SIA codes.
 Connection supervision by polling to IP receiver every 30 seconds (or
by user defined period).
 Backup channel, that will be used if connection with the primary
channel is lost.
 With parallel communication channels events can be sent to two
receivers at same time.

When Protegus service is enabled, events are first delivered to CMS,
and only then are sent to app users.
Works with Protegus app:
 “ Push ” and special sound notifications informing about events.

Remote system Arm/Disarm.

Remote control of connected devices (lights, gates, ventilation
systems, heating, sprinklers, etc.).
 Remote temperature monitoring (with iO or iO-WL expanders).

Different user rights for administrator and installer.
Notifies users:

Users can be notified about events with Protegus app.
Controllable outputs and inputs:

3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.

Outputs controlled by the Protegus app.

Add additional inputs and controllable outputs with wired and wireless iO expanders.
Quick setup:

Settings can be saved to file and quickly written to other communicators.

Two access levels for configuring the device for CMS administrator and for installer.

Remote configuration and firmware updates.