www.trikdis.com
28
February, 2020
“Ethernet” communicator
E16
9
Firmware update
Note:
When the communicator is connected to
TrikdisConfig
, the program will automatically offer to update the
device’s firmware if updates are present. Updates require an internet connection. Antivirus software, firewall
or strict access to internet settings can block the automatic firmware updates. In this case, you will need to
reconfigure your antivirus program.
The communicator’s firmware can also be updated or changed manually. After an update, all previously set settings will remain
unchanged. When writing firmware manually, it can be changed to a newer or older version. To update:
1.
Run
TrikdisConfig
.
2.
Connect the communicator via USB cable to the computer or connect to the communicator remotely.
If a newer firmware version exists, the software will offer to download the newer firmware version file.
3.
Select the menu branch
Firmware
.
4.
Press
Open firmware
and select the required firmware file. If you do not have the file, the newest firmware file can be
downloaded by registered users from www.trikdis.com , under the download section of the
E16
communicator.
5.
Press
Update [F12]
.
6.
Wait for the update to complete.
