TRI TOOL INC.
92-1739 Rev. 220506
24
RBL-G2 Lubricant Recommendations
• The Drive Gears require a heavy duty grease such as Chevron Ultra Duty
NLGI 2 (P/N 68-0024).
•
The Slide Rails and Tool Blocks require a light oil such as SAE 10 light
machine oil.
• The Feed Screw for the Tool Block and Tripper Block Assembly requires a
SAE 10 light machine oil for normal conditions, and under dusty conditions a
silicone, graphite, or molybdenum disulfide ‘dry’ lubricant.
•
You can use a light film of all-purpose grease. Be sure to examine it for grit
contamination frequently.
• The Bearings in the Hydraulic Motors are sealed and do not require any
lubrication.
Lubricant Recommendations for Air Motors
•
Air Motors require a Class 2 lubricant, viscosity of 100 to 200 SSU at 100°F
(38°C) minimum aniline point of 200°F (93°C), such as the following:
•
Tri Tool Inc. – Air Tool Lubricant (P/N 68-0022)
• Amoco – American Industrial Oil No. 32
•
Atlantic Richfield – Duro Oil S–150
• Chevron – A.W. Machine Oil 32
• Exxon – Nuto H32
• Shell – Tellus Oil 32
• The Bearings in the Air Motors are sealed and do not require additional
lubrication.
CAUTION
CAUTION: If a contaminated hydraulic fluid or if a contaminated air supply is used, it
may damage the equipment, which would void the warranty.