Model 612RBL-G2 thru 642RBL-G2 Clamshells
92-1739 Rev. 220506
23
11.
Tightly lock the Adjustable Slide Rail in place with the Hold-Down Screws and
fully snug the Adjustment Set Screws.
12.
Be sure that the Tool Holder runs smoothly and evenly for the full length of
travel.
13.
Readjust as necessary. The Tool Holder should move with some resistance.
Lubricate and Clean Tripper Assembly
Set Screw
Tripper Slide Rail
Cap Screw
Tripper Pin
Spring
Figure 9: Lubricate and Clean Tripper Assembly
1.
Back off the Set Screw until it disengages from the Tripper Slide Rail.
2. Unscrew the Cap Screw.
3. Pull the Tripper Slide Rail out of the Tripper Block. Look for the small spring
that the Tripper Slide Rail retains.
4. Pull the Tripper Pin out of the Tripper block.
5.
Clean off old lubrication and debris from the Tripper Slide Rail and Tripper Pin.
6. Apply a light coat of lubrication to the Tripper Slide Rail and Tripper Pin.
7. Reassembly the Tripper Assembly.