manualshive.com logo in svg

TRI tool 01-2140, Operation Manual, Page: 55 / 88

Share
Download
TRI tool 01-2140 Operation Manual Download Page 55

Model 612RBL-G2 thru 642RBL-G2 Clamshells

92-1739 Rev. 220506

53

12.  ACCESSORIES

The following accessories are recommended for use with the Model 600RBL-G2 

Clamshells and are available from Tri Tool Inc.
• 

Model 765RVC Hydraulic Power Supply (for single or dual hydraulic drive 

systems) Available in 480 volt, 380 volt and 240 volt configurations

• 

Model 757RSS Hydraulic Power Supply (for single hydraulic drive systems) 

Available in 480 volt, 380 volt and 240 volt configurations

• 

Portable Air Filter Caddy (P/N 75-0078) (for single or dual air drive systems)  

A FRL is required to protect the warranty on all Tri Tool Inc. air driven tools

•  600RBL Single Point Module Kit
•  600RBL OD Tracking Module Kit
•  600RBL Full Support Pad Sets
• 

Heavy duty electric drive motor kit (115 VAC or 230 VAC)

• 

CBM-3 Counterbore Module Kit (P/N 05-0220)

• 

Heavy Duty Sever Accessory Kit (P/N 05-0203) Converts tool modules (P/N 

08-1354) into heavy duty sever modules

• 

SANDVIK Sever Accessory Kit (P/N 05-0807) Converts tool modules 

 

(P/N 08-1354) into SANDVIK sever modules.

• 

Repair Kit, G2 Tool Module (P/N 05-0814)

• 

Repair Kit, G2 Tripper (P/N 05-0815)

•  Metal Jobsite and Shipping cases

Summary of Contents for 01-2140

























































































Reviews:

No comments