Plug and Play Setup
NTM6900 / WTM7026 Technical Reference
NOTE
: Do not change the values for any PCIPnP Setup option unless you understand the impact on system
operation. Depending on your system configuration, selection of other values may cause unreliable system
operation.
Clear NVRAM
This option allows you to clear NVRAM during system boot.
The Setup screen displays the system option:
Clear NVRAM [No]
Available options are:
No
Yes
Plug & Play O/S
This option indicates whether or not the operating system installed in the computer is Plug and
Play-aware. AMIBIOS only detects and enables PnP adapter cards which are required for system
boot. An operating system which is PnP-aware detects and enables all other PnP-aware adapter
cards. Set this option to
No
if the operating system (such as DOS or OS/2) does
not
use PnP.
NOTE:
You
must
set this option correctly or PnP-aware adapter cards installed in your computer
will not be configured properly.
The Setup screen displays the system option:
Plug & Play O/S [No]
Two options are available:
•
Select
No
to allow AMIBIOS to configure the devices in the system.
•
Select
Yes
if your system has a Plug and Play operating system and you want to allow the
operating system to configure all Plug and Play (PnP) devices which are not required for
bootup.
PCI Latency Timer
This option specifies the latency of all PCI devices on the PCI Local Bus. The settings are in units
equal to PCI clocks.
The Setup screen displays the system option:
PCI Latency Timer [64]
Available options are:
32, 64, 96, 128, 160, 192, 224, 248
TRENTON
Technology
Inc.
8-6-2
