NTM6900 / WTM7026 Technical Reference
Plug and Play Setup
Chapter 6 Plug and Play Setup
Plug and Play Setup
When you select
PCIPnP
from the BIOS Setup Utility Main Menu, the following Setup screen displays:
Main
Advanced
| PCIPnP | Boot
Security
Chipset
Exit
Advanced PCI/PNP Setup
WARNING: Setting wrong values in below sections may cause system to
malfunction.
Clear NVRAM
[No]
Plug & Play O/S
[No]
PCI Latency Timer
[64]
Allocate IRQ to PCI VGA
[Yes]
Palette Snooping
[Disabled]
PCI IDE BusMaster
[Enabled]
OffBoard PCI/ISA IDE Card
[Auto]
IRQ3
[Available]
IRQ4
[Available]
IRQ5
[Available]
IRQ7
[Available]
IRQ9
[Available]
IRQ10
[Available]
IRQ11
[Available]
IRQ14
[Available]
IRQ15
[Available]
DMA Channel 0
[Available]
DMA Channel 1
[Available]
DMA Channel 3
[Available]
DMA Channel 5
[Available]
DMA Channel 6
[Available]
DMA Channel 7
[Available]
Reserved Memory Size
[Disabled]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
Clear NVRAM during
System Boot
←→
Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10
Save and Exit
ESC Exit
BIOS SETUP UTILITY
PCIPnP Setup Screen
When you display the PCIPnP Setup screen, the format is similar to the sample shown above, except the
screen does not display all of the options at one time. If you need to change other options, use the down
arrow key to locate the appropriate option. Highlight the option you wish to change and press
<Enter>
to
display the available settings. Select the appropriate setting and press
<Enter>
again to accept the
highlighted value.
NOTE:
The values on the PCIPnP Setup screen do not necessarily reflect the values appropriate for your
motherboard. Refer to the explanations below for specific instructions about entering correct information.
PCIP
N
P S
ETUP
O
PTIONS
The descriptions for the system options listed below show the values as they appear if you have not yet run
PCIPnP Setup. Once values have been defined, they display each time PCIPnP Setup is run.
6-1
TRENTON
Technology
Inc.
