NTM6900 / WTM7026 Technical Reference
Motherboard Installation
The
Change Supervisor Password
feature can be configured so that a password must be entered each time
the system boots or just when a user attempts to enter the BIOS Setup Utility.
NOTE:
The null password is the system default and is in effect if a password has not been assigned or if
the CMOS has been corrupted. In this case, the "Enter CURRENT Password" prompt is bypassed when you
boot the system, and you must establish a new password.
If you select the
Change Supervisor Password
option, the following window displays:
Enter New Password
This is the message which displays before you have established a password, or if the last password entered
was the null password. If a password has already been established, you are asked to enter the
current
password before being prompted to enter the
new
password.
Type the new password and press
<Enter>
. The password cannot exceed six (6) characters in length. The
screen displays an asterisk (*) for each character you type.
After you have entered the new password, the following window displays:
Confirm New Password
Re-key the new password as described above.
If the password confirmation is miskeyed, AMIBIOS Setup displays the following message:
Passwords do not match!
[ OK ]
No retries are permitted; you must restart the procedure.
If the password confirmation is entered correctly, the following message displays:
Password Installed.
[ OK ]
4-7
TRENTON
Technology
Inc.
