NTM6900 / WTM7026 Technical Reference
Advanced Setup
USB Configuration
When you select
USB Configuration
from the Advanced Setup Menu, the following Setup screen
displays:
Main
| Advanced |
PCIPnP
Boot
Security
Chipset
Exit
USB Configuration
Module Version - 2.24.5-5-13.4
USB Devices Enabled:
None
Legacy USB Support
[Enabled]
USB 2.0 Controller Mode
[Full Speed]
BIOS EHCI Hand-Off
[Enabled]
Legacy USB1.1 HC Support
[Enabled]
Hotplug USB FDD Support
[Auto]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
Enables support for
legacy USB. AUTO
option disables legacy
support if no USB devices
are connected.
←→
Select Screen
↑↓
Select Item
+-
Change Field
F1
General Help
F10
Save and Exit
ESC Exit
BIOS SETUP UTILITY
USB Configuration Screen
When you display the USB Configuration screen, the format is similar to the sample shown above.
Highlight the option you wish to change and press
<Enter>
to display the available settings. Select the
appropriate setting and press
<Enter>
again to accept the highlighted value.
USB C
ONFIGURATION
O
PTIONS
The descriptions for the system options listed below show the values as they appear if you have not run the
BIOS Setup Utility program yet. Once values have been defined, they display each time the BIOS Setup
Utility is run.
Legacy USB Support
This option allows you to enable support for older USB devices. The
Auto
option disables legacy
support if no USB devices are connected. If this option is set to
Disabled
, the remaining three
options are not available.
The Setup screen displays the system option:
Legacy USB Support [Enabled]
Available options are:
Disabled
Enabled
Auto
5-19
TRENTON
Technology
Inc.
