TRENDnet TL2-FG142, User Manual

Page: 57 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
52
Profile Name The name used for indexing the profile table.
Each entry has the unique name which is composed of at maximum 16
alphabetic and numeric characters. At least one alphabet must be
present.
Profile
Description Additional description, which is composed of at maximum 64 alphabetic
and numeric characters, about the profile.
No blank or space characters are permitted as part of description. Use
"_" or "-" to separate the description sentence.
Rule When the profile is created, click the edit button to enter the rule setting
page of the designated profile. Summary about the designated profile
will be shown by clicking the view button. You can manage or inspect the
rules of the designated profile by using the following buttons:
Navigate: List the rules associated with the designated profile.
Edit: Adjust the rules associated with the designated profile.
Button
Click to add new IPMC profile. Specify the name and configure the
new entry. Click "Save".
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.16.2 Address Entry
This page provides address range settings used in IPMC profile.
The address entry is used to specify the address range that will be associated with IPMC
Profile. It is allowed to create at maximum 128 address entries in the system.
Items Description
Delete Check to delete the entry.
The designated entry will be deleted during the next save.
Entry Name The name used for indexing the address entry table.
Each entry has the unique name which is composed of at maximum 16
alphabetic and numeric characters. At least one alphabet must be
present.
Start Address The starting IPv4/IPv6 Multicast Group Address that will be used as an
address range.
End Address The ending IPv4/IPv6 Multicast Group Address that will be used as an
address range.
Button
Click to add new address range. Specify the name and
configure the addresses. Click "Save"
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.17 MVR
This page provides MVR related configurations.