© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
43
Hash Code Contributors
Items
Description
Source MAC
Address
The Source MAC address can be used to calculate the destination port for
the frame. Check to enable the use of the Source MAC address, or uncheck
to disable. By default, Source MAC
Destination
MAC Address
The Destination MAC Address can be used to calculate the destination
port for the frame. Check to enable the use of the Destination MAC
Address, or uncheck to disable. By default, Destination MAC Address is
disabled.
IP Address
The IP address can be used to calculate the destination port for the frame.
Check to enable the use of the IP Address, or uncheck to disable. By
default, IP Address is enabled
TCP/UDP Port
Number
The TCP/UDP port number can be used to calculate the destination port
for the frame. Check to enable the use of the TCP/UDP Port Number, or
uncheck to disable. By default, TCP/UDP Port Number is enabled.
Aggregation Group Configuration
Items
Description
Group ID
Indicates the group ID for the settings contained in the same row. Group
ID "Normal" indicates there is no aggregation. Only one group ID is valid
per port.
Port
Members
Each switch port is listed for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove the
port from the aggregation. By default, no ports belong to any
aggregation group. Only full duplex ports can join an aggregation and
ports must be in the same speed in each group.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.12.2 LACP
This page allows the user to inspect the current LACP port configurations, and possibly
change them as well.
Items
Description
Port
The switch port number.
LACP Enabled
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner.
Key
The Key value incurred by the port, range 1-65535 . The Auto setting will
set the key as appropriate by the physical link speed, 10Mb = 1, 100Mb =
2, 1Gb = 3. Using the Specific setting, a user-defined value can be
entered. Ports with the same Key value can participate in the same
aggregation group, while ports with different keys cannot.
Role
The Role shows the LACP activity status. The Active will transmit LACP
packets each second, while Passive will wait for a LACP packet from a
partner (speak if spoken to).
Summary of Contents for TL2-FG142
Page 1: ...TRENDnet User s Guide Cover Page...
Page 134: ......
