TRENDnet TL2-FG142, User Manual

Page: 101 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
96
fragmentation of the sFlow datagrams. Valid range is 200 to 1468
bytes with default being 1400 bytes.
Port Configuration
Items Description
Port The port number for which the configuration below applies.
Flow Sampler
Enabled Enables/disables flow sampling on this port.
Flow Sampler
Sampling
Rate The statistical sampling rate for packet sampling. Set to N to sample on
average 1/Nth of the packets transmitted/received on the port.
Not all sampling rates are achievable. If an unsupported sampling rate is
requested, the switch will automatically adjust it to the closest
achievable. This will be reported back in this field.
Flow Sampler
Max. Header The maximum number of bytes that should be copied from a sampled
packet to the sFlow datagram. Valid range is 14 to 200 bytes with default
being 128 bytes.
If the maximum datagram size does not take into account the maximum
header size, samples may be dropped.
Counter
Poller
Enabled Enables/disables counter polling on this port.
Counter
Poller Interval With counter polling enabled, this specifies the interval - in seconds -
between counter poller samples.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
5. Monitor
5.1 System
5.1.1 Information
The switch system information is provided here.
Items Description
System
Contact The system contact configured in Configuration | System | Information |
System Contact.
Name The system name configured in Configuration | System | Information |
System Name.
Location The system location configured in Configuration | System | Information
| System Location.
Hardware
MAC Address The MAC Address of this switch.
Time
System Date The current (GMT) system time and date. The system time is obtained
through the Timing server running on the switch, if any..
System
Uptime The period of time the device has been operational.