TRENDnet TL2-FG142, User Manual

Page: 56 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
51
Items Description
Port The switch port number of the corresponding STP CIST (and MSTI) port.
Path Cost Controls the path cost incurred by the port. The Auto setting will set the
path cost as appropriate by the physical link speed, using the 802.1D
recommended values. Using the Specific setting, a user-defined value
can be entered. The path cost is used when establishing the active
topology of the network. Lower path cost ports are chosen as forwarding
ports in favour of higher path cost ports. Valid values are in the range 1
to 200000000.
Priority Controls the port priority. This can be used to control priority of ports
having identical port cost. (See above).
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.16 IPMC Profile
This page provides IPMC Profile related configurations.
4.3.16.1 Profile Table
The IPMC profile is used to deploy the access control on IP multicast streams. It is
allowed to create at maximum 64 Profiles with at maximum 128 corresponding rules for
each.
System starts to do filtering based on profile settings only when the global profile mode
is enabled.
Items Description
Global Profile
Mode Enable/Disable the Global IPMC Profile.
Delete Check to delete the entry.
The designated entry will be deleted during the next save.