TRENDnet TL2-FG142, User Manual

Page: 78 / 134

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
73
Port
Members A check box is provided for each port of a private VLAN.
When checked, port isolation is enabled on that port.
When unchecked, port isolation is disabled on that port.
By default, port isolation is disabled on all ports.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.26 VCL
4.3.26.1 MAC-based VLAN
The MAC-based VLAN enties can be configured here. This page allows for adding and
deleting MAC-based VLAN entries and assigning the entries to different ports. This page
shows only static entries.
Items Description
Delete To delete a MAC-based VLAN entry, check this box and press save. The
entry will be deleted in the stack.
MAC Address Indicates the MAC address.
VLAN ID Indicates the VLAN ID.
Port
Members A row of check boxes for each port is displayed for each MAC-based
VLAN entry. To include a port in a MAC-based VLAN, check the box. To
remove or exclude the port from the MAC-based VLAN, make sure the
box is unchecked. By default, no ports are members, and all boxes are
unchecked.
Adding a New MAC-based VLAN
Click Add New Entry to add a new MAC-based VLAN entry. An empty
row is added to the table, and the MAC-based VLAN entry can be
configured as needed. Any unicast MAC address can be configured for
the MAC-based VLAN entry. No broadcast or multicast MAC addresses
are allowed. Legal values for a VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled when you click on "Save". A MAC-
based VLAN without any port members will be deleted when you click
"Save"
. The Delete button can be used to undo the addition of new MAC-
based VLANs. The maximum possible MAC-based VLAN entries are
limited to 256.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.26.2 Protocol-based VLAN
In a switch that supports protocol-based VLANs, traffic is handled on the basis of its
protocol. Essentially, this segregates or forwards traffic from a port depending on the
particular protocol of that traffic; traffic of any other protocol is not forwarded on the
port.
4.3.26.2.1 Protocol to Group
This page allows you to add new protocols to Group Name (unique for each Group)
mapping entries as well as allow you to see and delete already mapped entries for the
switch .