© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
78
Tag Mode
The tag mode specifying whether the EVC classification must be based
on the outer or inner tag. This can be used on NNI ports connected to
another service provider, where an outer "tunnel" tag is added together
with the inner tag identifying the EVC. The allowed values are:
Inner: Enable inner tag in EVC classification.
Outer: Enable outer tag in EVC classification.
Address
Mode
The IP/MAC address mode specifying whether the EVC classification
must be based on source (SMAC/SIP) or destination (DMAC/DIP)
addresses. The allowed values are:
Source: Enable SMAC/SIP matching.
Destination: Enable DMAC/DIP matching.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.28.2 Bandwidth Profiles
This page displays current EVC ingress bandwidth profile configurations. These policers
may be used to limit the traffic received on UNI ports. The settings can also be
configured here.
Items
Description
Start Policer
ID
The start Policer ID for displaying the table entries. The allowed range is
from 1 through 256.
Number of
Entries
The number of entries per page. The allowed range is from 2 through
256.
Policer ID
The Policer ID is used to identify one of the 256 policers.
State
The administrative state of the bandwidth profile. The allowed values
are:
Enabled: The bandwidth profile enabled.
Summary of Contents for TL2-FG142
Page 1: ...TRENDnet User s Guide Cover Page...
Page 134: ......
