© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
6
- Stop bits
: 1
- Flow Control
: None
Turning on the switch, then after few seconds of machine initialization, the system
management terminal will display the login screen as show below.
3.2 Login
■
Enter “
admin
” for the
switch.
■
Without the Password .
■
You can see “
＃
”.
If you want to set IP address of switch, you can enter configuration mode to setup the IP
address as the below.
# configure terminal
(config)# interface vlan 1
(config-if-vlan)# ip address 192.168.1.240 255.255.255.0
(config-if-vlan)#
4. Configuring with WEB
You are able to manage the switch with Http Web Browser. The default IP
settingis192.168.0.1 and Net Mask 255.255.255.0. The default Gateway is 0.0.0.0.
Before http connection, IP address configuration of the switch should be changed first.
1.
Please follow the instruction in Section 3.1 to complete the console connection.
2.
Login with “admin” (password is also none by default.)
3.
Use “show” command to check IP address of the switch first.
4.
Enter “show running-config interface vlan 1” command, and the prompt will show
the IP address of the switch as the below.
Summary of Contents for TL2-FG142
Page 1: ...TRENDnet User s Guide Cover Page...
Page 134: ......
