© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TL2-FG142
79
Disabled: The bandwidth profile is disabled.
Policer Mode The colour mode of the bandwidth profile. The allowed values are:
Coupled: Colour-aware mode with coupling enabled.
Aware: Colour-aware mode with coupling disabled.
CIR
The Committed Information Rate of the bandwidth profile. The allowed
range is from 0 through 10000000 kilobit per second.
CBS
The Committed Burst Size of the bandwidth profile. The allowed range is
from 0 through 100000 bytes.
EIR
The Excess Information Rate of the bandwidth profile. The allowed range
is from 0 through 10000000 kilobit per second.
EBS
The Excess Burst Size of the bandwidth profile. The allowed range is
from 0 through 100000 bytes.
Button
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
4.3.28.3 EVCs
This page displays current EVC configurations. On this system, only Provider Bridge
based EVCs are supported.
Items
Description
EVC ID
The EVC ID identifies the EVC. The range is from 1 through 128.
VID
The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-
custom tag depending on the NNI port VLAN configuration. The range is
from 1 through 4095.
IVID
The Internal/classified VLAN ID in the PB network. The range is from 1
through 4095.
Learning
The learning mode for the EVC controls whether source MAC addresses
are learned for frames matching the EVC. Learning may be disabled if the
EVC only includes two UNI/NNI ports. The possible values are:
Enabled: Learning is enabled (MAC addresses are learned).
Disabled: Learning is disabled (MAC addresses are not learned).
Inner Tag
Type
The inner tag type is used to determine whether an inner tag is inserted
in frames forwarded to NNI ports. The possible values are:
None: An inner tag is not inserted.
C-tag: An inner C-tag is inserted.
S-tag: An inner S-tag is inserted.
S-custom-tag: An inner tag is inserted and the tag type is determined by
the VLAN port configuration of the NNI.
Inner VID
Mode
The inner VID Mode affects the VID in the inner and outer tag. The
possible values are:
Normal: The VID of the two outer tags aren't swapped.
Tunnel: The VID of the two outer tags are swapped, so that the VID of
the outer tag is taken from the Inner Tag configuration and the VID of
the inner tag is the EVC VID. In this mode, the NNI ports are normally
configured to do EVC classification based on the inner tag.
Inner Tag VID The Inner tag VLAN ID. The allowed range is from 0 through 4095.
Inner Tag
PCP/DEI
Preservation
The inner tag PCP and DEI preservation. The possible values are:
Preserved: The inner tag PCP and DEI is preserved.
Fixed: The inner tag PCP and DEI is fixed.
Inner Tag PCP The inner tag PCP value. The allowed range is from 0 through 7.
Inner Tag DEI The inner tag DEI value. The allowed value is 0 or 1.
Outer Tag VID The EVC outer tag VID for UNI ports. The allowed range is from 0
through 4095.
NNI Ports
The list of Network to Network Interfaces for the EVC.
Summary of Contents for TL2-FG142
Page 1: ...TRENDnet User s Guide Cover Page...
Page 134: ......
