TRENDnet TEW-716BRG User Manual Download Page 42

 

 

 

 

 

 

 

 

 

 

© Copyright 2012 TRENDnet. All Rights Reserved. 

 

 

 

41

 

 
TRENDnet User’s Guide

 

Limited Warranty 

Limited Warranty 

TRENDnet warrants its products against defects in material and workmanship, under 

normal use and service, for the following lengths of time from the date of purchase.   

 

TEW-716BRG – 3 Years Warranty 

AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. 

If a product does not operate as warranted during the applicable warranty period, 

TRENDnet shall reserve the right, at its expense, to repair or replace the defective 

product or part and deliver an equivalent product or part to the customer. The 

repair/replacement unit’s warranty continues from the original date of purchase. All 

products that are replaced become the property of TRENDnet. Replacement products 

may be new or reconditioned. TRENDnet does not issue refunds or credit. Please 

contact the point-of-purchase for their return policies. 
TRENDnet shall not be responsible for any software, firmware, information, or memory 

data of customer contained in, stored on, or integrated with any products returned to 

TRENDnet pursuant to any warranty. 
There are no user serviceable parts inside the product.  Do not remove or attempt to 

service the product by any unauthorized service center.  This warranty is voided if (i) the 

product has been modified or repaired by any unauthorized service center, (ii) the 

product was subject to accident, abuse, or improper use (iii) the product was subject to 

conditions more severe than those specified in the manual. 
Warranty service may be obtained by contacting TRENDnet within the applicable 

warranty period and providing a copy of the dated proof of the purchase. Upon proper 

submission of required documentation a Return Material Authorization (RMA) number 

will be issued. An RMA number is required in order to initiate warranty service support 

for all TRENDnet products. Products that are sent to TRENDnet for RMA service must 

have the RMA number marked on the outside of return packages and sent to TRENDnet 

prepaid, insured and packaged appropriately for safe shipment. Customers shipping 

from outside of the USA and Canada are responsible for return shipping fees. Customers 

shipping from outside of the USA are responsible for custom charges, including but not 

limited to, duty, tax, and other fees. 

 
WARRANTIES EXCLUSIVE

: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS 

WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S 

OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE 

EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, 

EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR 

IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE 

OR USE OF TRENDNET’S PRODUCTS. 
 
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND 

EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST 

OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, 

IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR 

MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY 

ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. 
 
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO 

EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN 

CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, 

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR 

PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL 

LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, 

MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY 

OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND 

OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY 

FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL 

OF ITS ESSENTIAL PURPOSE. 

 
Governing Law

: This Limited Warranty shall be governed by the laws of the state of 

California. 

Some TRENDnet products include software code written by third party developers. 

These codes are subject to the GNU General Public License ("GPL") or GNU Lesser 

General Public License ("LGPL").  
Go to 

http://www.trendnet.com/gpl

 or 

http://www.trendnet.com

 Download section 

and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. 

These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of 

the developers. TRENDnet does not provide technical support for these codes. Please go 

to 

http://www.gnu.org/licenses/gpl.txt

 or 

http://www.gnu.org/licenses/lgpl.txt

 for 

specific terms of each license.

 

PWP05202009v2 

 

 

 

 

 

 

2012/10/15

Summary of Contents for TEW-716BRG












































Reviews: