Treedental TR-KID-7, Instructions For Use Manual

Page: 4 / 34

-2-
1)This product needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided, and this
unit can be affected by portable and mobile RF communications equipment.
2)
Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect operation of the unit.
3)
Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
4)
Caution: this machine should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, this machine
should be observed to verify normal operation in the configuration in which it will be used
Guidance and manufacture’s declaration – electromagnetic emission
The
TR-KID-7
is intended for use in the electromagnetic environment specified below. The customer of the
user of the
TR-KID-7
should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment – guidance
RF emissions
CISPR 11
Group 1
The
TR-KID-7
use RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emission
CISPR 11
Class A
The
TR-KID-7
is suitable for use in all
establishments, other than domestic and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies