Treedental TR-KID-7 Instructions For Use Manual Download Page 21

-19-

——“

”: the patient chair downward;

——“

”: backrest backward of the patient chair;

——“

”: backrest forward of the patient chair.

2 Spittoon chair position

Press “

”, the backrest of the patient chair shall move shortly to the forefront position so that patient may spit and gargle;

and press the key again, the backrest will return to the original position.

Note:
In case of pressing other function keys while the backrest of the patient chair is moving, this key’s function will stop
automatically.

3 water supple

Press “ ”, supply the gargling water until the pre-set time; during the water supply pressing the key again in the course of

water supply, the water supply shall stop. Please refer to “

10 set key” for the instructions of time set.

4 Cuspidor water rushing

Press “

”, the water will rush the cuspidor for three minutes and stop automatically; in the course of rushing, press the

key again, it stops.

5 Constant temperature hot water

Press “

”, the constant temperature heater will start working to heart the water to 40

; in case of water temperature

decrease, the heater will work automatically (the indicator light flashes in the course of hearting and keeps on when the hot water
reaches the pre-set value); press the key again, the heater stops immediately (the indicator light is off).

Note:
The hot water is only for the purpose of gargling and 3-way syings. (Must connect to the water supply first before using
the water heater in order to prevent the water heater from short circuit due to dry heating).

6 Film viewer

Press “

”, close the power supply of the film viewer; press the key again,turn on the power supply of the film viewer.

Note:

There’s another power switch on the film viewer.

7 operating light

Press “

”, turn off the operating light, press the key again,turn on the power supply of the cold light lamp.

Note:

There’s another power switch on the cold operating light

8 Memory position

The patient chair can define nine memory positions into three groups such as A, B and C with each group having three chair

position memory.

Summary of Contents for TR-KID-7



































Reviews: