M
ENU
F
UNCTIONS
Page 32
CineMonitor
HD
Evolution
TECHNICAL
CVBS STD SELECT
Available only when CVBS or ACC input are selected
Sets the video composite standard detection.
AUTO DETECT / PAL BGHID / NTSC 3.58
NTSC
Available only when CVBS or ACC input are selected
Sets NTSC standards:
NTSC Japan (black 0 IRE)
NTSC US (black 7.5 IRE)
ACCESSORY
Available only when CVBS or ACC input are selected
Sets the accessory input:
COMPONENT RGB (HD/SD RGB signal with composite synchronization on G)
COMPONENT YPrPb (HD/SD YPrPb signal with composite synchronization on Y)
CVBS (Composite)
HDMI MODE: CANON/NORMAL
Available when HDMI input is selected
Improves the video standard switching when shooting with a Canon DSLR.
GPI
Assigns functions and trigger conditions to the ACC Tally pin and to the 4 GPIs.
ACC
Set the trigger condition of the Tally activated through ACCessory connector: ACTIVE LOW, ACTIVE
HIGH or LIGHT SENSOR *.
FUNCTION #
Assigns a function to the pin # of the GPI connector (J002)
Available functions: NONE, TALLY RED, TALLY GREEN, ZOOM, HORIZON, SWITCH INPUT, FOCUS
HELPER, EXPOSURE
CONDITION #
Sets the trigger condition of the function #
Available conditions (depending on the function): NOT ACTIVE, FALLING EDGE, RISING EDGE, LOW
STATE, HIGH STATE, LIGHT SENSOR *
* LIGHT SENSOR is a special trigger for Tally activated though a light sensor placed in front of the
camera Tally light. LIGHT SENSOR trigger is set to 1.9v DC
