U
SING THE
D
IRECT
F
UNCTIONS
Page 18
CineMonitor
HD
Evolution
Zoom
Short push on
Zoom
– toggles between different zoom modes.
OFF / 1.33x zoom / Pix to pix zoom
When activating the zoom, a pictogram showing the relative position of the magnified zone is
displayed.
Arrows move the picture on Top/Bottom, Left/Right positions. Moving increments are proportional
to 1/8 of the video standard. Fine adjustment can be made by rotating the rotating knob.
A long push on the Zoom key centers the picture, the next push sends back to the full picture
display.
Zoom pixel to pixel
Displays the picture in full resolution mode (pixel to pixel or 1:1).
Beyond the native resolution of the picture, magnify implies to create pixels that doesn’t exist. This is
why the pixel to pixel mode (1:1 zoom) is the higher magnification ratio in a Transvideo monitor.
1.33x zoom
The 1.33x zoom mode magnifies the active 16/9 area of the picture output by the Arri Alexa in 4:3
mode.
Zoom in SD
In SD, the picture is displayed in full screen. In this case there is an important magnification ratio
applied to the original picture. The resultant picture includes created pixels and lines and cannot be
considered as a proof. In this mode the waveform will be superimposed to the picture.
Aspect Ratio and Anamorphic desqueeze
Short push on
Aspect ratio
–
toggles aspect ratio:
1.33:1 (4/3)
SD only
1.78:1 (16/9)
HD & SD
Anamorphic 1.3x HD only (anamorphic desqueeze for 1.3x lenses on a 16/9 sensor)
Anamorphic 2x
HD only (anamorphic desqueeze for 2x lenses on a 4:3 sensor)
2.40:1
SD only
3.20:1
HD & SD (anamorphic desqueeze for 2x lens on a 16/9 sensor)
No sub functions in Aspect Ratio
