M
ENU
F
UNCTIONS
Page 30
CineMonitor
HD
Evolution
TALLY
Tally can be activated via the GPI Sub-D9 or ACC Lemo8 connectors or via the camera REC/STOP
trigger embedded in the SDI (if any).
Several Tally signals can be used at the same time.
When Tally is connected to the ACC Lemo8 connector, the Tally trigger condition is adjustable in
MENU / TECHNICAL / GPI > ACC.
When Tally is connected to the GPI Sub-D9 connector,
- the Tally color (red/green) is adjustable in MENU / TECHNICAL / GPI > FUNCTION #;
- the Tally trigger condition is adjustable in MENU / TECHNICAL / GPI > CONDITION #.
TALLY ACC
Assigns a specific Tally mode for the ACC Lemo8 connector.
Possible configurations: OFF – ON AIR MODE – CUSTOM MODE
TALLY GPI
Assigns a specific Tally mode for the GPI Sub-D9 connector.
Possible configurations: OFF – CUSTOM MODE
TALLY SDI
Assigns a specific Tally mode for the SDI embedded Tally signal.
Possible configurations: OFF – REC MODE – ON AIR MODE – CUSTOM MODE
CUSTOM MODE
Custom Tally mode selection.
Includes RED DOT, SQUARE, DUAL SQUARE and FRAME* styles.
REC MODE POSITION
Allows the user to place the tool in different position of the screen.
When USER is selected, use arrows and the rotating knob to move the tools.
DEFAULT replaces the tool at the factory preset.
LED ON/OFF
Activates or deactivates the TALLY LED on the front panel.
*
FRAME is active on “FRAME3” of the frameline.
