U
SING THE
D
IRECT
F
UNCTIONS
Page 20
CineMonitor
HD
Evolution
Input Selection
Short push on
Input Sel
–
toggles video inputs.
Long push on Input Sel to select the active video inputs.
Long push on
Input Sel
– selection of the active video inputs
An active input is highlighted in orange, an inactive in white. An inactivated input cannot be
selected by the Input Sel key.
Press F1 to activate or deactivate SDI
Press F2 to activate or deactivate CVBS
Press F3 to activate or deactivate the ACCessory input (YPrPb or RGB or CVBS)
Press F4 to activate or deactivate HDMI
Inactivating the accessory input reduces the power consumption of the CineMonitorHD of about 4
Watts.
The format of the ACC input can be configured in MENU / TECHNICAL when ACC input is selected. It
is possible to select between component YPrPb, component RGB or CVBS.
Display adjustments
Short push on
ADJ
–
toggles parameters to adjust:
Brightness, Contrast, Saturation, Hue (NTCS only)
Adjust the value by rotating the knob.
Validate by pushing the knob.
IMPORTANT:
The settings are different for each input. All settings are stored in setup memories. There is one
memory per input. That means you can setup the ACC input differently of the SDI input. It is
useful with some specific cameras offering a viewfinder menu and a HD SDI output.
