M
ENU
F
UNCTIONS
Operator Manual Rev 3.5
Page 33
VOLTAGE ALARM
VOLTAGE DISPLAY: ON/OFF
FUEL READER (Anton-Bauer): ON/OFF
Displays constantly the input voltage from the power supply or the battery.
When a Logic Series Digital battery from AntonBauer is detected, the Fuel Reader also gives to the
user the remaining percentage of the battery and the time to run (see page 8).
UNIT
Toggles between Volts, Percent and Minutes (percent and and minutes only available with the
FuelReader).
ALARM
When activated the battery pictogram is displayed in red if the voltage of the power supply goes
under the threshold setting.
ALARM THRESHOLD
Sets the threshold value.
Under this value a security alert can inform the user when it is time to swap the battery on the
monitor.
POSITION
Allows the user to place the tool in different position of the screen.
When USER is selected, use arrows and the rotating knob to move the tools.
DEFAULT replaces the tool at the factory preset.
REVERSE SCROLLING
Reverses the scrolling direction in the menus.
EXIT TEMPO
Sets of the automatic exit temporization from SLOW to FAST
LIGHTS
KEYBOARD
Activates or deactivates the keyboard light (if available on the monitor). In AUTO, the keyboard light
turns automatically on when a key is pressed.
KEY DIMMER
Dimming of the brightness of the keyboard light.
It is possible to switch off completely light.
LED DIMMER
Dimming of the brightness of the power led.
It is possible to switch off completely the led.
