M
ENU
F
UNCTIONS
Operator Manual Rev 3.5
Page 27
HORIZON
Displays a color coded electronic leveler on screen.
SENSOR
Toggles between internal and external sensors
HORIZON
Internal sensor
HORIZON 2
(1)
Internal sensor with compensation of acceleration and shocks (gyro)
WIRELESS HORIZON
(2)
Uses the wireless Transvideo VirtualHorizon3™
BETZ
(3)
Uses external electronic bubble designed by BETZ Tools
DISPLAY: NORMAL / REVERSE
(4)
Toggles the action of the horizon, normal or reversed.
RANGE
(4)
Sets the range of the horizon
HORIZON
+/-5°, +/-10°, +/-22°, +/-45°, +/-90°
HORIZON 2
+/-2°, +/-5°, +/-10°, +/-22°, +/-45°, +/-90°
WIRELESS HORIZON
+/-2°, +/-5°, +/-10°, +/-22°, +/-45°, +/-90°
STYLE
Displays the Horizon on the monitor and selects the style of the virtual horizon (6 different models).
0 CAL
(4)
Sets the horizon to 0. A temporization of 5 seconds allows the user to stabilize the position of the
system. Pushing the rotating knob during calibration exits from the timing.
0 CAL ON TAP: ON/OFF
(4)
Activates or deactivates the Cal-on-Tap functionality.
When activated, tap on screen or on Transvideo logo to zero calibrate the horizon.
0 CAL ON TAP THRESHOLD
(4)
Adjust the threshold level of the Cal-on-Tap.
Level 4 requests a tough tap to trigger the 0 CAL, while level 1 requests a soft tap.
POSITION
Allows the user to place the tool in different position of the screen.
When USER is selected, use arrows and the rotating knob to move the tools.
DEFAULT replaces the tool at the factory preset.
(1)
Available only if VirtualHorizon2™ option is implemented in the monitor. VirtualHorizon2 is an
optional feature. It can be ordered with the monitor or implemented through an upgrade. Contact
us for more information.
(2)
Available only if external bubble VirtualHorizon3™ is connected to the monitor via Bluetooth. The
monitor needs to be equipped with a Bluetooth module (option). Contact us for more information.
(3)
The BETZ sensor is an external electronic bubble designed by Betz-Tools. It needs to be
connected to the monitor through J001 connector with a specific cable. Transvideo does not
support this third party equipment.
(4)
Not applicable with BETZ sensor.
