1800 816 277
www.tti.com.au
26
FloodRite
™
Product HandBook
Troubleshooting
If a fault develops with the FloodRite, the following trouble shooting table provides guidance to identify and
rectify the problem.
Problem
Possible
Remedy
Engine will not crank
Dead battery
Replace fusible link
Melted Fusible Link
Replace fusible link
Loose Connections
Clean and tighten connections
Faulty Ignition Switch
Check switch operation, replace as
needed
Faulty magnetic, relay, neutral
start or clutch switches
Check and replace as needed
Mechanical problem in engine
Check Engine
Problem in theft deterrent
system
Check service manual for system
tests
Engine cranks too
slowly to start
Weak Battery
Check battery and charge as needed
Loose or corroded
connections
Clean and tighten connections
Faulty starter motor
Test Starter
Mechanical problems with
engine or starter
Check engine and starter, replace
worn out parts
Starter keeps
running
Damaged pinion or ring gear
Check gears for wear or damage
Faulty plunger in magnetic
switch
Test starter pull-in and hold-in coils
Faulty ignition switch or
control circuit
Check switch and circuit
components
Binding ignition key
Check key for damage
Starter spins, but
engine will not crank
Faulty over-running clutch
Check over-running clutch for
proper operation
Damaged or worn pinion gear
or ring gear
Check gears for damage and wear;
replace as needed
Starter does not
engage/disengage
properly
Faulty magnetic switch
Bench test starter
Damaged or worn pinion gear
or ring gear
Check gears for damage and wear;
replace as needed