1800 816 277
www.tti.com.au
15
FloodRite
™
Product HandBook
2. Attach the hydrant supply hose to the discharge pipe, refer to Figure 8.
Figure 8 – Pipework Configuration
3. Close all other ball valves.
4. Open the hydrant fill valve on the FloodRite™ unit.
5. Open the supply hydrant’s valve slowly; water will flow under pressure through the FloodRite’s pipe
system into the top of the tank.
CAUTION! To prevent overflow, do not leave the filling operation
unattended.
6. When the tank is filled, close the supply hydrant’s valve.
7. Close the discharge pipe valve.
8. Disconnect the hydrant supply hose and stow it.