1800 816 277
www.tti.com.au
19
FloodRite
™
Product HandBook
Figure 11 – Hose Reel
FloodRite Loading Procedure
The FloodRite™ Dust Suppression Unit is designed to slip into a tipper tray, and when not required, can be
easily removed using the integrated TTi Loading Leg System. The FloodRite™ unit is loaded as follows,
referring to the included illustrations:
WARNING! The FloodRite™ unit is heavy and must be loaded or unloaded
correctly. Ensure this procedure is followed exactly to avoid injury or death
to personnel or damage to the unit.
WARNING! The FloodRite™ unit must never be unloaded with water in the
tanks. Ensure the tank has been completely emptied prior to remove from
the tipper tray.
•
The FloodRite™ unit has lifting points at each corner of the steel frame, and two forklift slots across the
width of the frame. Lift the unit up from the ground using a suitable capacity forklift or crane to a sufficient
height to allow the insertion of the front and rear legs at full extension. This will be approximately the
height of the tipper tray.
•
At the front of the unit (driver’s cab end), mount the front legs with the lugs facing towards the rear. Use
the pins provided the lock the legs in place vertically.
NOTE! Ensure the rear legs are inserted such that they slope away from the
back of the unit.