![background image](http://html1.mh-extra.com/html/transtank/floodrite/floodrite_operators-handbook-manual_1152630009.webp)
1800 816 277
www.tti.com.au
9
FloodRite
™
Product HandBook
5. Inspect the tank for any damage or abrasions that may occur during transit.
CAUTION! The unit must be securely mounted to the vehicle. Failure to do
so may result in the unit moving or falling off the moving vehicle. Warranty
is conditional on the unit being correctly mounted.
6. Position your FloodRite™ onto the vehicle and mount securely, refer to the FloodRite™ Loading Procedure.
NOTE! When connecting into the vehicle’s air system, follow all instructions
in the vehicle manufacturer’s handbook or consult the dealer.
NOTE! Install a pressure protection valve to prevent accidental pressure
loss, which may compromise the vehicle’s operating systems.
NOTE! TTi recommend using quick connect fittings to facilitate easy
disconnection if the unit is to be removed from vehicle.
7. Where your FloodRite™ unit is fitted with solenoid valves, use the supplied pneumatic hose (refer to
Figure 2) to connect into the vehicle’s air system. The correct connection point is usually after the main
reservoir and the primary air circuit / main brake system. Refer to the vehicle manufacturer’s handbook
or consult the dealer.
Figure 2 – Pneumatic Hose and Tee Piece
8. Ensure the 12 volt battery is fully charged and correctly connected to the pump unit’s engine, refer to
Figure 3. Refer to the supplied pump unit’s manual and prepare the engine for use, such as filling its tank
with fuel.