TransCore encompass 4, Manual

Page: 108 / 208

Chapter 7 Commands
TransCore Proprietary
7–91
21 Set Date
Command #21 sets the date. Enter the date in the proper format: two-digit decimal entries with no
spaces between characters and using forward slashes “/” as delimiters. The entry format is as follows:
21MM/DD/YY
where
MM
represents the month (01 to 12).
DD represents the day (01 to 31).
YY represents the last two digits of the year (00 to 99).
/ is the date delimiter.
Reader response:
Done
22 Display Time and Date
Command #
22
displays the reader’s current time and date. One space separates the time and the date
output.
Reader message:
HH:MM:SS:hh MM/DD/YY
where
HH
represents hours.
MM represents minutes.
SS represents seconds.
hh represents hundredths of seconds.
: is the time delimiter.
MM represents the month.
DD represents the day.
YY represents the last two digits of the year.
/ is the date delimiter.
Command Group 3 – Append Information
Group 3 commands append useful information to reader transmissions, such as IDs, error messages, and
sensor input reports. Auxiliary information such as reader number, antenna number (or manual entry code),
number of times the previous tag was read, and sensor input status can be appended to the ID using the
Group 3 commands. See command “524 Display Appended Information Status” on page 7–104.