Encompass 4 Reader System Guide
TransCore Proprietary.
7–132
Reader response:
Done
844 Disable Retransmit (Factory Default)
The function causes tag data to be retransmitted after the retransmit time as defined by
Wiegand Retransmit Interval” on page 7–98,
if the tag is in the read zone at that time or afterward. The
function is implemented by resetting the tag ID uniqueness filter once the Wiegand retransmit interval time
is expired.
RS-232 Retransmit for ATA or eATA data only.
845 Enable Retransmit
Use
#46NN
for setting time. For example:
#4605 = 5 second retransmit time
.
This function sends data again, even if the uniqueness is enabled. The uniqueness filter is reset after the
retransmit interval.
Summary of Contents for encompass 4
Page 207: ......
