Encompass 4 Reader System Guide
TransCore Proprietary.
7–104
S1
two stop bits (
#1011
)
P0
no parity (factory default)
P1
even parity (
#1020
)
P2
odd parity (
#2021
)
D0
00 ms end-of-line delay (fixed) (
#1022
)
One space is required between each value. For example, if factory default settings are assigned, the
reader message is
MAIN B5 S0 P0 D0
indicating 9600 baud, one stop bit, no parity, and 0 ms end-of-line delay.
Note:
The information transmitted in response to command
#522
applies to data and command
mode operation only. While operating in download mode, default communications parameters are
always used.
524 Display Appended Information Status
Command
#524
displays the information being appended to the reader transmissions. Command
#31N
appends information.
Reader message:
IDAP T<0> D<0> X<0 to 1>
where
T0
Time not appended
T1
Time appended (not valid for the Encompass 4 Reader)
D0
Date not appended
D1
Date appended (not valid for the Encompass 4 Reader)
X0
Auxiliary information not appended (factory default)
X1
Auxiliary information appended
One space is required between each value. For example, if factory-default settings are assigned, the
reader response is
IDAP T0 D0 X0
indicating time, date, and auxiliary information not appended.
Summary of Contents for encompass 4
Page 207: ......
