Programmer's Guide
POSjet
®
1500
Codes and Commands
Nov-07
Rev M
Page 67
Configuring Windows
®
Printer Drivers (WIN95, 98, Me)
The standard Windows printer driver configuration properties are described in the operating system’s help under the
“printers” topic. The Ithaca specific configuration is described below.
Start/EndDoc Tab
Use these setting to cause additional actions to happen at the start and end of a document.
Additional StartDoc Commands:
This is where you place text and binary commands that you want sent to the printer before a document is printed.
Additional EndDoc Commands:
This is where you place text and binary commands that you want sent to the printer after a document is printed.
Line Feeds:
This is where you enter the number of line feeds that will be done after a document is printed.
Cut Receipt:
This option will send a cut command to the printer after the document is printed.
Fire Cash drawer 1:
This option will send a fire cash drawer 1 command to the printer after the document is printed.
Fire Cash drawer 2:
This option will send a fire cash drawer 2 command to the printer after the document is printed.
Note: For these options to work the printer driver must be in “bi-directional” mode. To check this, go to “Details”
tab, “Spool settings”. For NT and Win 2000, go to the “ports” tab.
Summary of Contents for POSJET 1500
Page 1: ...PROGRAMMER S GUIDE POSjet 1500 PN 20 03398 Rev M Nov 2007...
Page 14: ......
