Programmer's Guide
POSjet
®
1500
EPOS Control Codes
Nov-07
Rev M
Page 213
Function
Set Character Size
EPOS ONLY
ASCII
GS ! <n>
Hexadecimal
1DH 21H <n>
Decimal
<29> <33> <n>
Description
The GS ! <n> command sets the horizontal and vertical scaling. The upper nibble is the horizontal
scale, and the lower nibble is the vertical scale. The minimum size is x1, and the maximum size is
x2.
Where <n>
xxxx0000
Vertical scale 1
xxxx0001
Vertical scale 2
0000xxxx
Horizontal scale 1
0001xxxx
Horizontal scale 2
Function
Begin Italics
EPOS ONLY
ASCII
[ESC] 4
Hexadecimal
1BH 34H
Decimal
<27> <52>
Description
The [ESC] 4 command begins italics print mode.
Note 1
Italics are not available in all print modes.
Function
End Italics
EPOS ONLY
ASCII
[ESC] 5
Hexadecimal
1BH 35H
Decimal
<27> <53>
Description
The [ESC] 5 command ends italics print mode.
Panel Button Commands
Function
Enable/Disable Paper Feed
ASCII
[ESC] c 5 <n>
Hexadecimal
1BH 63H 35H <n>
Decimal
<27> <99> <53> <n>
Range
0
≤
n
≤
255
Description
The [ESC] c 5 <n> command enables or disables the
Button. When the least significant bit
(LSB) of <n> = one, the
Button is disabled; when it is zero, the button is enabled. To
prevent problems caused by accidentally pressing the
Button, use the command to disable it.
The
Button is temporarily enabled, regardless of how the command is set during the wait
time set by the [GS] z 0 command for paper insertion and during the recovery confirmation time.
Where <n>
Bit 0 = 1 the
Button is disabled
Bit 0 = 0 the button is enabled.
Summary of Contents for POSJET 1500
Page 1: ...PROGRAMMER S GUIDE POSjet 1500 PN 20 03398 Rev M Nov 2007...
Page 14: ......
