TransAct POSJET 1500, Programmer'S Manual

Page: 235 / 294

Programmer's Guide POSjet
®
1500 EPOS Control Codes
Nov-07 Rev M Page 221
Bit Off/On Hexl Decimal Status
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
2 - - - Undefined
Off 00H <0>
Paper is not being fed by the
Button
3
On 08H <8> Paper is being fed by the FEED Button
4 On 10H <16> Not used; fixed to on
Off 00H <0> No paper out stop 5
On 20H <32> Printing stops due to paper out
Off 00H <0> No error 6
On 40H <64> Error occurs
7 Off 00H <0> Not used; fixed to off
Table 55 Off line Status (<n> = 2)
Bit Off/On Hex Decimal Status
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
Off 00H <0> No mechanical error 2
On 04H <4> Mechanical error occurred
Off 00H <0> No auto-cutter error 3
On 08H <8> Auto-cutter error occurred
4 On 10H <16> Not used; fixed to on
Off 00H <0> Unrecoverable error occurred
22
5
On 20H <32> Recoverable error occurred
6 Off 00H <0> Not used; fixed to off
7 Off 00H <0> Not used; fixed to off
Table 56 Error Status (<n> = 3)
Bit Off/On Hex Decimal Status
0 Off 00H <0> Not used; fixed to off
1 On 02H <2> Not used; fixed to on
Off 00H <0> Paper low sensor: paper adequate 2,3
On (0CH) (<12>) Paper low sensor: paper low
4 On 10H <16> Not used; fixed to on
Off 00H <0> Paper out sensor: paper adequate 5,6
On 60H <96> Paper out sensor: paper not present
7 Off 00H <0> Not used; fixed to off
Table 57 Paper Roll Sensor Status (<n> = 4)
22
The POSjet
®
1500 does not define any errors as recoverable. Following the recovery process will not restore
the data buffers.