TransAct POSJET 1500, Programmer'S Manual

Page: 263 / 294

Programmer's Guide POSjet
®
1500 Data Processing and
Communications
Nov-07 Rev M Page 249
POSjet
®
Coupon-Cut-Logo Feature
The POSjet® 1500 printer has a feature that will allow a coupon and or logo graphic to printed as part of the
existing auto cutter command.
To activate this feature, it must first be configured. Configuration, consists of specifying in what order the Coupon-
Cut-Logo is processed and optionally, how much paper is to be feed after the new cut operation.
Once configured, the Coupon and/or logo must be defined and loaded into the printer. The “Universal Graphics”
feature should be used to define and load the graphic. The Coupon is named “Coupon”, and the Logo is named
“Logo”. They may be saved in any resolution and of any size. They also need not be all graphics.
The existing application cut command will be replaced by the Coupon-Cut-Logo operation.
Configuration options are as follows:
Cut Command Logo:
Cut-Logo Perform Feed to cut, then cut, and then print the Logo.
Coupon-Cut Print the Coupon, Feed to Cut, and Cut.
Logo-Cut Print the Logo, Feed to Cut, and Cut.
Cut-Coupon Perform Feed to cut, then cut, and then print the Coupon.
Coupon-Cut-Logo Print the Coupon, Feed to cut, Cut, ad then print the Logo.
Logo-Cut-Coupon Print the Logo, Feed to cut, Cut, ad then print the Coupon.
Cut-Logo-Coupon Perform the Feed to cut, Print the Logo and then the Coupon.
Cut-Coupon-Logo Perform the Feed to cut, Print the Coupon and then the Logo.
Logo-Coupon-Cut Print the Logo, then the Coupon, feed to cut and Cut.
Coupon-Logo-Cut Print the Coupon, then the Logo, feed to cut and Cut.
Disabled Perform the Normal cut.
Cut Command Logo Feed: 0 to 80 mm.