TransAct Ithaca 90PLUS Series, Programmer'S Manual

Page: 37 / 172

Programmer's Guide PcOS Series 90PLUS Printer Control Codes
Vertical Motion
11/07/05 Rev Q Page 25
Function Set form length in lines
ASCII
[ESC] C <n>
Hexadecimal
1BH 43H <n>
Decimal
<27> <67> <n>
IPCL &%SL<m
1
> <m
2
>
EPOS [ESC] C <n>
Description
The [ESC] C <n> command sets the form length to <n> lines at the current line
spacing.
Function Set form length in inches
ASCII
[ESC] C [NUL] <n>
Hexadecimal 1BH 43H <0> <n>
Decimal <27> <67> <0> <n>
IPCL
&%SI <m
1
> <m
2
>
EPOS
none
Description
The [ESC] C [NUL] <n> command sets the form length to <n> inches.
Function Begin automatic line feed
ASCII
[ESC] 5 <01>
Hexadecimal 1BH 35H 01H
Decimal <27> <53> <01>
IPCL
&%MA
EPOS
none
Description
The [ESC] 5 <01> command sets automatic line feed mode which overrides the
configuration setting.
Function End automatic line feed
ASCII [ESC] 5 <0>
Hexadecimal
1BH 35H 00H
Decimal
<27> <53> <0>
IPCL
&%CA
EPOS none
Description The [ESC] 5 <0> command ends automatic line feed mode which overrides the
configuration setting.
Function Reverse line feed
ASCII
[ESC] ]
Hexadecimal
1BH 5DH
Decimal
<27> <93>
IPCL &%LR
EPOS none
Description
The [ESC] ] command performs a reverse line feed at the current line spacing.
Notes
1. The receipt station can tolerate no more than
1/2
inch of reverse feed.
2. In validation mode, the form cannot be reversed past the first line of validation.
3. In slip mode, the form should not be reversed past the first line of the slip.