Drive and Cabinet
20
AFDE-SVU02F-EN
Drive Cabinet Component
Locations
Frame 4 Units
180180-A07 and 180180-A09
The main drive components for a Frame 4 unit are listed
below. Each numbered item corresponds to a number in
Figure 5, p. 21
.
1. Circuit Breaker, 600V
2. Inductor
3. AC Contactor
4. Power Module Assembly (refer to
Figure 7, p. 24
and
Figure 8, p. 25
for details)
5. Input Filter Capacitor Assembly
6. OIM
Note:
OIM is mounted inside panel for design
sequence P0 and earlier. OIM is mounted
outside panel for design sequence R0 and later.
7. Fans, 115Vac, Inductor (4)
8. Transformer, 115Vac, Control Power
9. Fan, 115Vac, Contactor
10. Resistors, 100k Ohms, 50W
11. Precharge Resistors
12. Relay, Oil Pump and Control Power Terminals
13. Fuse, Class J, 600V, 10A (2)
14. Fuse, Class J, 600V, 25A (1)
15. Fuse, Class CC, 600V, 10A (1)
16. Fuse, Class T, 600V, 300A (3)
17. Fuse, Class CC, 600V, 20A (3)
18. Fuse, Class CC, 600V, 1A (3)
19. Ground Lug, 2–600 MCM (for AWG/MCM equivalents
in mm2, refer to
20. Nameplate, Power Module
21. Door Inter-lock (2)
22. Surge Suppressor
23. EMC Line Filter (Optional)
24. Fuse, Class CC, 600V, 6A (3) (Optional)
25. Oil Pump Motor Starter Assembly (Optional)
