17
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
Figure 3.4.4 Feeder Without PTFE Pipe
1)
For each filament feeder: screw PTFE pipe on without forcing, until
you can’t turn it anymore,
unscrew for half a turn to avoid excessive pressure on threads.
Figure 3.4.5 Fitting PTFE Pipe on Feeder
2)
After fitting the PTFE pipe on each feeder, you can proceed to mount feeder on the machine
routing the piping thru the ports just above each feeder.
Figure 3.4.6 Route Pipe Through Each
Passage
Figure 3.4.7 Engage Feeder Securely in
Each Location
3)
Mount all feeders, be sure that each feeder is fully engaged, pushing it downwards.
4)
Secure each feeder with lock lever.
