101
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
10)
Inspect. This is how should be looking for a good quality job:
Glue is BELOW the plate level, yet you don’t see
it anymore the magnet surface
Figure 6.30.8 Completed Glue Application to Plate Magnet
11)
Let it cure with supplied GCODE.
Just in case, below are the gcode program lines needed for curing:
M190 S100
M117 CURE 1
G4 S1800
M190 S120
M117 CURE 2
G4 S1800
M117 DONE
M190 S10
12)
After curing, let plate cool down one hour before moving/using it.
13)
Remove masking label before use!
