72
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK 3ntr 3D Printers
–
Maintenance & Troubleshooting Manual
SSR cabling: CORRECT CABLING (screw terminal holding just the metal tip of the lead)
NOTE
- ALL leads entering the SSR must be checked
Figure 6.15.5 Correct SSR Cabling Connection
SSR cabling
:
WRONG CABLING (screw terminal holding the plastic part of the lead)
Figure 6.15.6 Incorrect SSR Cabling Connection
Heater Powered:
•
Check that there is current arriving on the heater poles (fed by brown and blue leads in picture)
•
If power is present on heater poles and still no heating, then replace heater.
