6
GB
1. Position the blocfor™ 20R/30R 150 kg so that it fits over the bolt at the top of the leg bracket (1) and
secure it by fully tightening the lock nut (2)
2. With its screw slightly loose, push the angle bracket up against the blocfor™ unit to centralise the
position of the cable guide.
3. Tighten the angle bracket’s nut
4.2.2 Mounting the blocfor™ 20R/30R 150 kg and leg bracket assembly onto the Tracpode
1. Remove the locking pin and then position the blocfor™ 20R/30R 150 kg at the required height on the
Tracpode (there are 3 possible positions) (1). For this operation refer to the manual specific to the Tracpode.
2. Push the locking pin through the holes in the leg bracket and through the hole in the Tracpode.
3. Secure the locking pin using the spring clip
2
2
1
3
3
2
1
