TracPhone FleetBroadband Page 27 User Manual Download

Page: 27 / 146

Chapter 2: Getting started

Getting started with the wireless IP Handset

To connect an external power supply to the cradle

The cradle for the IP Handset serves as a charger when it is connected to an
external power supply (10-32 V DC, 7 W).

To connect an external power supply to the cradle, do as follows:

1. On the back of the cradle, unscrew the two screws holding the cover.

2. Remove the cover.

3. Connect your power supply to the cradle.

There are two options for connecting to the cradle:

•

Using the internal DC connector in the cradle.
The connector is a proprietary DC Jack, 2.5 mm, positive center.

Terminal block J101

DC Connector

Summary of Contents for FleetBroadband



















































































































































Search results

Summary of Contents for FleetBroadband

Reviews:

Related manuals for FleetBroadband

Brands by name

Popular brands

TracPhone FleetBroadband, User Manual

Search results

Summary of Contents for FleetBroadband

Reviews:

Related manuals for FleetBroadband

Brands by name

Popular brands