TracPhone FleetBroadband, User Manual

Page: 33 / 146

Chapter 2: Getting started
22 Establishing a connection using BGAN terminal
Establishing a connection
If one or more handsets have already been connected to the terminal, and the
new handset has not been connected to the terminal before, you must
configure the new IP Handset. You need to set up the user name, password
and local number in the IP Handset and in the web interface of the BGAN
terminal. For further information, see
Connecting subsequent handsets to the
BGAN terminal on page 23.
If no SIM PIN is required
If the IP Handset is connected to a BGAN terminal where the SIM PIN is
disabled or has already been entered, the BGAN terminal automatically sets
up a communication profile (SIP profile) and assigns the local number 0501 to
the first handset that is connected.
If a SIM PIN is required
If the IP Handset is connected to a BGAN terminal where the SIM PIN is
required and has not yet been entered, you need to enter the SIM PIN for the
terminal. To do so, you need to know the Administrator user name and
password as well as the SIM PIN for the BGAN terminal.
To enter the BGAN terminal’s SIM PIN, do as follows:
1. From the main screen of the handset, press the center select key to enter
the menu system.
2. Select BGAN .
3. Select Enter PIN code .
4. Enter the Administrator user name and select OK .
For information on how to type text in the handset, see How to enter text in
the IP Handset on page 54.
Note
This menu item is not available if the PIN has already been
accepted. You can check at
Status > PIN status to see if the PIN
has been accepted.