TracPhone FleetBroadband, User Manual, Page: 34 / 146

Chapter 2: Getting started
Establishing a connection using BGAN terminal 23
2222
Gett
ing s
tar
te
d
5. Enter the Administrator password and select OK .
6. Enter the SIM PIN and select OK.
If the SIM PIN is rejected, see the next section Wrong PIN .
When the PIN is accepted, the BGAN terminal automatically sets up a SIP
profile and assigns the local number 0501 to the first handset that is
connected.
Wrong PIN
After entering the user name and password, you have 3 attempts to enter the
PIN, before you are asked to enter the PUK (Pin Unblocking Key). The PUK is
supplied with your BGAN SIM card.
Enter the PUK followed by a new PIN of your own choice. The PIN must be
from 4 to 8 digits long.
IP Handset ready
When the display shows the handset ready symbol in the upper right
corner, the handset is ready for making a call.
If the handset ready symbol is crossed out you cannot make a call. The
display will normally show a message explaining why the handset is not
ready.
Connecting subsequent handsets to the BGAN terminal
If one ore more handsets have already been connected to the terminal, you
must configure the new IP Handset. You need to set up the user name,
password and local number in two places:
• In the IP Handset
Caution! If you enter a wrong PUK 10 times, the SIM card will no
longer be functional, and you have to contact your Airtime
Provider for a new SIM card.