Chapter 3: Operating the IP Handset
IP Handset menus
73
3333
O
p
er
at
ing the
IP
H
a
nd
se
t
To set or disable automatic shut down
You can set up the wireless IP Handset to shut down automatically if it does
not receive a signal from a wireless access point for a certain period of time.
To set or disable automatic shut down, do as follows:
1. From the
Settings
menu, select
Automatic shut down
.
2. Use the keys
and
, or press
Edit
to select the wanted time interval
before auto power off. You have the following choices:
•
Disabled
•
2, 5, 15, 30 or 60 minutes
3. Select the time span and press
Back
.
To enable or disable the web server
A web server is built into the IP Handset. It is primarily used for uploading
software and for editing contacts in the IP Handset. You can enable or disable
the web server.
To enable or disable the built-in web server,
do as follows:
1. From the
Settings
menu, select
Web
server
.
2. Select
Edit
to enable or disable the web
server. The default settings is enabled
(checked).
For information on the web server, see
Summary of Contents for FleetBroadband
